Do Skateboards Need Spacers?

The bearing spacers are a great option for those who want to slide and skate hard. Skaters typically won’t put enough pressure on their boards without them, though it is always good investment if you plan on doing tricks or sliding around town!

If you’re a skateboarder, then you know that having the right gear is essential to enjoying your hobby. But what about skateboard spacers? Do they really serve a purpose, or are they just another unnecessary accessory? In this blog post, we’ll take a closer look at skateboard spacers and discuss whether or not they’re beneficial to skaters. Stay tuned!

How Bearings Work

Explaining the working of skateboard bearings

Knowing how bearings work will help you understand why bearing spacers are necessary. As the name suggests, they provide space between each of your skate’s components so that it can move more freely without bumping.The skate bearings has four main components.

The inner ring: This is the innermost component of the bearing and is typically made from steel. It has a smooth surface that the balls or rollers rotate on.

The outer ring: outer ring is also usually made from steel and sits on the outside of the inner ring. It also has a smooth surface that the balls or rollers rotate on.

The cage: It is a component that holds the balls or rollers in place. It is usually made from steel or brass and sits between the inner and outer ring.

The balls or rollers: They are the components that actually make contact with the inner and outer rings. They rotate on the smooth surfaces of the rings and help to reduce friction.

How Should a Bearing Spacer be Installed?

Once you have everything assembled on the axle as shown here, tighten it down until there is no more movement. Make sure not to crank too hard or crush anything with your tightening force because this could cause damage and reduce durability of equipment components over time.

The most important thing to remember when tightening your wheels is that you should always bear spacers in order not have any noise or friction on the spin. If there’s no discernible drag, then it’s probably tight enough!

Importance of Bearing spacers

Bearing spacers keep the two bearings in alignment so they can spin smoothly without any interference. Without this, your wheels would be noisy and prone to galling or scoring of their inner race surfaces which will ruin them quickly!

When you get your bearings aligned on the axle using spacers and two different sizes of screws, it will transfer more force from each turn to make sure they are perfectly positioned. This means that there’s less friction for optimal speed with maximum performance!

Types of Bearing Spacers

There are a few different types of bearing spacers:

Standard bearing spacers: These are the most common type of spacer and are typically made from steel or aluminum. They are designed to fit between the inner and outer rings of the bearing and keep them properly aligned.

Thin bearing spacers: thin bearing spacers are designed to be used in conjunction with standard bearing spacers. They are typically made from aluminum and help to reduce friction between the bearings and the spacer.

Wide bearing spacers: Wide bearing spacers are designed to be used in conjunction with standard bearing spacers. They are typically made from steel or aluminum and help to keep the bearings properly aligned while also reducing noise and vibration.

Common problems without spacers

There are a few common problems that can occur without bearing spacers:

The bearings can become misaligned, causing noise or vibration.

The bearings can wear prematurely, due to inadequate support.

The bearings may not rotate as smoothly as they should.

What Are The Best Bearing Spacers?

Our bearing Spacers ensure that every tooth touches, which will give a more precise fit and smooth movement throughout their length while also increasing speed!

Bones Bearing Spacers

Bones bearing spacers are designed to be used in conjunction with standard bearing spacers. They are typically made from aluminum and help to reduce friction between the bearings and the spacer.

Bones bearing spacers are an excellent choice for those who want to improve the performance of their bearings. They are also a good option for those who are looking to extend the life of their bearings. 

Hockey Bearings

Hockey bearings are designed for use in inline skating, roller skating, and hockey. They are typically made from steel or ceramic and can be either single or double-rowed. Hockey bearings are available in a variety of sizes, so be sure to choose the right ones for your needs.

I would recommend using bone bearing spacers in conjunction with hockey bearings. The spacers will help to reduce friction and extend the life of the bearings.

FAQs

Do skateboards need truck spacers?

Most skateboards do not come with truck spacers, but they can be a helpful addition if your trucks are feeling loose. Spacers go between the axle and hanger of your trucks and help to keep them tight, preventing your wheels from wobbling. If you’re experience wheel bite (when your wheels touch the deck of your board while turning), adding truck spacers can also help to alleviate this issue.

Do Bones bearings come with spacers?

That’s right. Includes a set of 8 Bones Reds Bearings, speed washers, and 4 bearing spacers to keep your skateboard wheels true for years! instructions are included in the box when you buy new bones reds balls themselves so don’t worry about losing them or having any issues later down the line.

Do bearing spacers slow you down?

The answer is no! bearing spacers will not slow you down. They act like cups to help your wheels turn easier, but they don’t have any effect on how quickly the bearings wear out- so if anything just run them loose for a noisy ride.

Do spacers make your skateboard faster?

When it comes to skateboarding, there are two schools of thought when it comes to spacers. Some riders believe that spacers make their boards faster, while others contend that they have no effect on speed. So who is right? The answer may surprise you.

Scientifically speaking, spacers do in fact make your skateboard faster. By increasing the distance between the wheels and the deck, spacers reduce friction and allow the wheels to roll more freely. This gives you a small but significant boost in speed. 

However, the effect is so small that most riders will never notice the difference. In other words, don’t expect to set any new records just by adding spacers to your board. But if you’re looking for a marginal improvement in performance, spacers are definitely worth considering.

What do spacers do on skateboard wheels?

Spacers are an important part of any skateboard wheel set-up. They sit between the bearing and the hub of the wheel and help to keep the bearings from rubbings against the inside of the wheel. 

This friction can cause the bearings to wear down over time, making them less effective at spin.

In addition, spacers help to keep the bearings aligned with the axle, which helps to prevent them from coming loose during riding. While spacers are not necessary for skateboarding, they can help to prolong the life of your bearings and improve the performance of your wheels.

Conclusion:

All in all, skateboard spacers are a great way to keep your board in good condition. Not only do they help with the overall look of your board, but they can also prevent damage and prolong the life of your bearings and wheels. If you’re looking for a quick and easy way to improve your skating experience, we definitely recommend adding spacers to your set-up!


Share post on
Ashley
By Ashley

Hi everyone, I am Ashley, live in Sheffield, England. I'm a Boardsports enthusiast and I've been skateboarding streets since my childhood. As to this site, the goal is to help beginner riders find their perfect equipment so they can have an enjoyable experience on whatever type of board best suits them- whether it be downhill riding or long boarding! Everything written here should be taken as opinion only because everyone's preferences are different, but at least now there will always seem less confusion when looking for gear online.

Leave a Reply

Your email address will not be published.


Auto Riding is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Recent Comments

No comments to show.
Accessories

Do Skate Tools Work On All Skateboards

All the best skateboard tools are universal, meaning they work with most boards. For...

By Ashley
Cool Skateboard Helmets to Buy in 2022 Accessories

Cool Skateboard Helmets to Buy in 2022

The best skateboard helmets can save your life. Skateboarding is a risky sport, and...

By Ashley
Cheap Cameras for Skateboarding in August 2022 Accessories

Cheap Cameras for Skateboarding in August 2022

Skateboarding is a sport that requires its participants to be in the moment and...

By Ashley
Best Skateboard Wheels to Buy in 2022 Accessories

Best Skateboard Wheels to Buy in 2022

What are the best skateboard wheels? What are some things to keep in mind...

By Ashley
Best Shoes for Skateboarding Accessories

Best Shoes for Skateboarding

Skateboarding is a sport that requires the use of different parts of your body...

By Ashley

Latest Posts

Learning Guide

What Skateboard Does Lazer Crawford Use

Lazer Crawford is a professional skateboarder who has been sponsored by some of the...

By Ashley
Learning Guide

what electric skateboard does casey use

Casey Neistat is a popular YouTuber known for his creative and innovative videos. He...

By Ashley
Learning Guide

What Skateboard Does Sabre Norris Use

Sabre Norris is a young Australian skateboarder who has gained a lot of attention...

By Ashley
Learning Guide

What Size Skateboard Does Paul Rodriguez Use

It's no secret that professional skateboarder Paul Rodriguez is one of the most successful...

By Ashley
Learning Guide

Who is Tony Hawk

54-year-old Tony Hawk is a world-renowned skateboarder, actor, and author. Born in 1968 in...

By Ashley
Learning Guide

What type of Skateboard does Tony Hawk Ride

Tony Hawk is one of the most iconic skateboarders of all time. He's known...

By Ashley
Learning Guide

What age should you start skateboarding?

The preferred age for a skateboard is 5-10 years but it needs special care....

By Ashley
Learning Guide

How many skateboards are there in the world

In 2017, it was reported that there were 85 million skateboarders worldwide. Of these...

By Ashley