For downhill luge-style skating or any other situation where your goal is going as fast possible, ABEC 9 and higher bearings would be ridiculous to use.
If you aren’t spending a fortune on these high quality parts then don’t trust that they are in fact certified by the industry leading warranty provider — it could end up costing more later down the line if something goes wrong!
Do ABEC ratings matter for skateboarding?
The ABEC rating system was developed for the precision machinery industry and is not necessarily indicative of how well a bearing will perform on a skateboard. In general, higher-rated bearings will be more precise and have less friction than lower-rated bearings, but this does not mean that they are automatically better for skateboarding.
ABEC rating – What does it mean?
The ABEC rating is a standard that is used to rate the precision and tolerances of skateboard bearings. Bearings with a higher ABEC rating will spin faster and last longer than those with a lower ABEC rating.
There are five different ABEC ratings: 1, 3, 5, 7, and 9. The higher the ABEC rating, the more expensive the bearing will be. However, not all skateboarders need or want the fastest and most expensive bearings. Some skaters are perfectly happy with lower-rated bearings that spin at a slower speed.
ABEC ratings are not the only thing to consider when purchasing skateboard bearings. You also need to take into account the size, durability, and price. Skateboard bearings come in different sizes, so you will need to make sure that you purchase bearings that fit your skateboard deck.
Durability is important if you plan on doing a lot of skating, as you don’t want your bearings to wear out quickly. And finally, price is always a consideration when making any purchase.
If you are unsure of what ABEC rating to purchase, ask your local skate shop or do some research online. There are many resources that can help you make an informed decision about which skateboard bearings are right for you.
How an ABEC Rating Is Determined
The ABEC rating is a measure of how well your bearing supports the weight on it. To get this number, you need to ask yourself four questions:
- How close is your bore to 8 millimeters ?
- How close is the outside diameter to 22mm in microns?
- What is the width of the bearing in microns?
- What is the maximum run-out of the ball (in microns)?
What do ABEC ratings actually measure?
The ABEC standards cover the dimensions that can be measured with an instruments. They don’t include Running Noise or Starting Torque, but it does matter for your bearing’s lifespan! Lubricants also have their own set of measurements which are not covered by these numbers either
Is there a lower grade than ABEC 1?
There is no lower grade than ABEC 1. The ABEC rating system goes from 1 to 9, with 1 being the lowest and 9 being the highest. That being said, there are some skateboard bearings on the market that are not rated by the ABEC system. These bearings are usually cheaper and of lower quality than ABEC-rated bearings.
What difference is there between ABEC 1 and ABEC 9 in a skateboard?
The main difference between ABEC 1 and ABEC 9 skateboard bearings is the level of precision and tolerance. Bearings with a higher ABEC rating are more precise and have tighter tolerances than those with a lower ABEC rating.
This means that they will spin faster and last longer. However, not all skateboarders need or want the fastest and most expensive bearings. Some skaters are perfectly happy with lower-rated bearings that spin at a slower speed.
How long do ABEC 9 bearings last?
ABEC 9 bearings are designed to last longer than other bearings on the market. However, there are many factors that can affect the lifespan of a bearing, such as how often it is used, the type of skateboarding it is used for, and how well it is maintained. With proper care and maintenance, ABEC 9 bearings can last for many years.
Are there any other standards for measuring Bearing precision?
Yes, there are other standards for measuring bearing precision. However, the ABEC rating system is the most widely used and recognized standard. Other standards include the ISO standard and the Bearing Industry Association of America (BIA) standard.
Are the “No-Name” ABEC precision bearings really manufactured to the correct tolerances?
There is no way to know for sure if “No-Name” ABEC precision bearings are manufactured to the correct tolerances. However, it is generally assumed that they are not as precise or durable as bearings that are made by reputable brands and that have been rated by the ABEC system.