Any experienced driver knows that a smooth ride is the key to an enjoyable journey. This is especially true when it comes to long-distance travel when even the slightest bump can cause fatigue. One way to ensure a smooth ride is to make sure your vehicle’s bearings are in good condition.
Bearings help to reduce friction between moving parts, and they can be found in everything from wheels to motors. Over time, bearings can become worn down, causing your vehicle to vibrate and making it more difficult to control.
Washers can help increase the life of bearings by providing a smooth surface for them to rotate on. As a result, washers not only improve the quality of your ride but can also help to extend the life of your vehicle’s bearings.
Where do washers go on skateboards?
Any avid skateboarder knows that maintaining their board is key to keeping it in optimal condition for tricks and jumps. Part of this maintenance is making sure the bolts are tightly screwed in and the washers are properly in place.
But where do the washers go on a skateboard? The answer may surprise you – they go on the outside of the deck. This keeps them from getting caught on the wheels or coming loose during a trick. So next time you’re doing some skating, make sure those washers are in place – your deck will thank you for it!
Do you need spacers and washers for skateboard bearings?
In short, no. Most bearings come with spacers and washers included, and those that don’t usually don’t need them. However, there are a few exceptions to this rule.
First, if you’re using aftermarket bearings (bearings not made specifically for skateboards), it’s always a good idea to check with the manufacturer to see if spacers and washers are required.
Second, if you’re experiencing speed wobbles or vibration issues, adding spacers or washers may help to resolve the problem.
Finally, if you’re simply looking to fine-tune your ride, spacers and washers can be used to adjust the spacing of your wheels. So, while you don’t technically need spacers and washers for skateboard bearings, they can be helpful in some situations.
What do washers do on a skateboard?
Washers are essential for keeping your skateboard in good working condition. Without washers, the bolts that hold your trucks to the deck can loosen, and your wheels can start to wobble.
Washers also help to absorb vibrations, making for a smoother ride. In addition, they can provide a bit of extra grip, which can be helpful if you’re skateboarding on slippery surfaces.
So, next time you’re out cruising around on your skateboard, take a moment to appreciate the humble washer – without it, you might not be able to stay on your board for long!
Can you ride without spacers?
Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they’re a good investment if you want your skateboards performing at its best.
What are skateboard washers?
Bushing washers are metal pieces that fit under the trucks and keep them from getting deformed by pressure. They slide on easily, making replacement quick & easy!