There are a few ways to make your skateboard wheels slower. One way is to drive them in the dirt, which will clog up the bearings and make them slower. Another way is to put glue on the bearings, which will make them slower but also make your skateboard harder to turn.
You can also try just tightening the bearings, which will make the wheels slower but also make your skateboard harder to push. Finally, you can tighten the nut a quarter turn each wheel until you reach the desired speed.
However, bear in mind that if you go too slow, your style will suffer.
Why would you want to skateboard wheels slower?
When it comes to skateboarding, one of the most important factors is the speed of your wheels. Generally speaking, the faster your wheels are, the smoother your ride will be.
However, there are also benefits to skating with slower wheels. For one thing, slower wheels provide more traction, making it easier to control your board. In addition, slower wheels are easier on the pavement, which can help to extend the life of your deck.
And finally, skating with slower wheels can actually be more fun than skating with faster ones. When you’re bombing down a hill at high speed, you can get a real sense of adrenaline rush. So if you’re looking for a little extra excitement in your skating, consider giving slower wheels a try.
6 Effective Ways to Slow Down Your Skateboard
1. Skid your back foot on the ground.
The easiest and most common way to slow down your skateboard is to skid your back foot on the ground. This will create friction, which will in turn slow down your board. The only downside to this method is that it can be difficult to keep your balance, especially if you are going at a high speed.
2.Do an emergency stop
If you are going too fast and need to stop quickly, you can do an emergency stop. To do this, you simply place your front foot on the ground and drag it back until you come to a stop. This will cause your back wheels to skid, so be careful not to lose your balance.
3.Use your front foot to brake
Another way to slow down your skateboard is to use your front foot to brake. To do this, you place your front foot on the ground and apply pressure until you slow down. This method is more effective than skidding your back foot, but it can be difficult to keep your balance.
4. Turn your skateboard
Turning your skateboard is a great way to slow down if you are going too fast. To do this, simply turn your board in the direction you want to go. This will cause your wheels to skid, so be careful not to lose your balance.
5.Make a curve when you notice high speed on your board
When you are going down a hill or ramp, it is easy to pick up speed. To prevent this, simply make a turn or curve in your path. This will cause your wheels to skid and slow you down.
6. Get off your skateboard
If you are really going too fast and are in danger of losing control, the best thing to do is to get off your skateboard. This may seem like an obvious solution, but it is the safest way to slow down if you are out of control.
Now that you know some ways to slow down your skateboard, be sure to practice them so you are prepared for when you need to use them. Skateboarding is a great way to exercise and have fun, but it is important to be safe. Ride with caution and always wear protective gear.
Are softer skateboard wheels slower?
When choosing skateboard wheels, one important factor to consider is hardness. Softer wheels are typically made of urethane and have a durometer, or hardness, of 78a or lower.
Harder wheels are usually made of polyurethane and have a durometer of 80a or higher. Most skateboarders prefer wheels that fall somewhere in the middle, with a durometer of around 78a to 82a.
Softer wheels are generally better for street skating, as they provide more grip and are less likely to slide out on slick surfaces. They are also better for absorbing vibrations from rough terrain.
However, softer wheels will wear down more quickly than harder ones and may not be well suited for high-speed skating or vert skating. When it comes to speed, harder wheels will typically roll faster than softer ones. Ultimately, it is up to each individual skater to decide what type of wheel is best for their needs.
Do bearing spacers slow you down?
In the world of skateboarding, speed is often prized above all else. Skaters who can push themselves to the limit are considered the most hardcore, and those who can master tricks at high speeds are lauded as being particularly skilled.
Bearing spacers are small metal or plastic discs that are placed between the inner and outer races of bearings, and they are often used to fine-tune the performance of a skateboard.
Some skaters believe that bearing spacers can help to increase speed, but there is no scientific evidence to support this claim. In fact, bearing spacers may actually cause more friction than they prevent, which could lead to a loss of speed.
Ultimately, bearing spacers are a matter of personal preference, and skaters should experiment with different setups to find what works best for them.
That’s it for now! We hope you found this post helpful. If you have any questions, or if there are other ways we can help make your skateboard wheels slower, please let us know in the comments section below. Thanks for reading, and happy skating.