In this blog post, we’ll be discussing how to make your skateboard wheels smaller. This is a common modification that can be made in order to improve the performance of your skateboard.
We’ll outline the steps you need to take to make the change, and also provide some tips on how to get the most out of your smaller wheels. Keep reading for more information.
Does Skateboard Wheel Size Matter? The Perfect Diameter
If you’re a skateboarder, then you know how important it is to have the right size wheels. The wrong size can make it difficult to land tricks and can cause your wheels to come into contact with your board. So, does skateboard wheel size matter?
The answer is yes – skateboard wheel size matters a lot. The average skateboarder should pick wheels between 52 and 54 millimeters, depending on what they’re skating and where they’re skating.
It’s not only the diameter that matters, though – the hardness and quality of the polyurethane have a big impact on performance, too. You can’t buy cheap wheels with a large diameter and expect a smooth cruising experience.
So what type of skateboard wheels do you need that fits your skating style? If you’re just starting out, it’s best to go with smaller, softer wheels. Once you get more experience, you can move up to larger, harder wheels. Whatever size you choose, make sure you pick quality wheels that will give you a good ride.
Why smaller wheels are actually better for skating
There are several reasons why smaller wheels are actually a better choice for skating. First of all, smaller wheels provide more control and maneuverability. This is especially important for skateboarders who want to perform tricks.
Second, smaller wheels are less likely to catch on cracks or pebbles, which can cause a skater to lose balance and fall. Finally, small wheels create less friction, which means that skaters can glide more smoothly over smooth surfaces.
Overall, smaller wheels may not provide the same speed as larger ones, but they offer distinct advantages in terms of control and maneuverability.
Can you put smaller wheels on a skateboard?
While it is possible to put smaller wheels on a skateboard, it is not generally recommended. The reason for this is that smaller wheels have less surface area in contact with the ground, which can make the skateboard less stable and more difficult to control.
Additionally, smaller wheels tend to be made of harder materials, which can make them less forgiving over rough surfaces. As a result, most skateboarders prefer to use wheels that are around 50-60mm in diameter.
However, if you are looking for a challenge, or you simply prefer the look of smaller wheels, there is no reason why you can’t give them a try. Just be prepared for a bit of a learning curve.
Why are smaller wheels better for street skating?
To make your skateboard wheels smaller, follow these steps:
1. Remove the wheels from the skateboard by loosening the nuts or bolts that hold them in place.
2. Inspect the wheels for any damage or debris that may interfere with the sizing process, and sand down any rough edges or bumps on the surface of the wheel if necessary.
3. Hold one wheel in each hand, and press your thumbs against opposite sides of the wheel to form a seal around it.
4. Measure diagonally from edge to edge to determine how small you need to make your wheels for optimal performance.
5. Follow the manufacturer’s instructions for cutting or sanding the wheels to resize them. Be sure to take safety precautions when using power tools.
6. Reattach the wheels to the skateboard and tighten the nuts or bolts to secure them in place. Test-ride your skateboard to ensure that the new wheel size is suitable before skating on public surfaces.
Are 52mm wheels too small?
Wheels in the 52mm size range offer a good balance between speed, grip and control when skating. They’re perfect for younger riders who want to learn how to ride down hills without getting too fast or lost on their first few tries at it.
Some tips on how to get the most out of your smaller wheels
If you’re looking to get the most out of your smaller wheels, here are a few tips to keep in mind:
1. Remember that smaller wheels can mean more maneuverability. This can be good for tight turns and getting around obstacles.
2. However, small wheels can also make it more difficult to build up speed. If you’re looking to go fast, you may want to consider bigger wheels.
3. Make sure your wheels are properly inflated. This will help with both speed and maneuverability.
4. Smaller wheels can be more susceptible to flats, so it’s always good to have a spare tire or tube on hand.
5. When riding on rough terrain, be aware that your smaller wheels can make it more difficult to keep your balance.
Following these tips, you’ll be able to get the most out of your smaller wheels and enjoy a smoother, faster ride.
How to make your skateboard wheels smaller without changing the trucks?
If you’re looking to change the size of your wheels without changing the trucks, you’ll need to get new wheels compatible with your existing trucks.
The good news is that there are plenty of options out there, so you should be able to find the perfect wheels for your skating style. Just be sure to do your research before making a purchase, and you’ll be ready to roll in no time.
What size wheels does Tony Hawk Ride?
Tony Hawk is a professional skateboarder who is well-known for his exploits in the world of vert skating. He is also respected for his work in promoting skateboarding as a legitimate sport.
When it comes to the question of what size wheels Tony Hawk rides, the answer is 53-56mm. This is a fairly common wheel size for beginners or bigger riders skating street, skate parks, bowls and vert ramps. The reason that this size is often recommended for beginners is that it provides a good balance between stability and maneuverability.
It is also less likely to cause wheel bite, which can be a problem with smaller wheels. Ultimately, whether or not Tony Hawk rides 53-56mm wheels is not as important as the fact that he is a skilled and experienced skateboarder who knows what works best for him.
Conclusion
So there you have it, a few simple tips for making your skateboard wheels smaller. It’s not an exact science, so feel free to experiment with the size and shape of your new wheels until you find what works best for you.
And as always, if you have any questions or need help, let us know in the comments section below. Thanks for reading!
Leave a Reply